Zendure SolarFlow 2400 Pro: Balcony Solar Storage at IFA 2026

By Sepehr· 08/09/2026· Updated 08/09/2026· 4 min read
Zendure SolarFlow 2400 Pro: Balcony Solar Storage at IFA 2026

Written and reviewed by Sepehr. See our editorial policy.

Zendure used IFA Berlin 2026 to put its SolarFlow 2400 Pro back in front of a European audience, launching it for the region alongside two new stablemates — the SolarFlow 2400 AC+ and SolarFlow 1600 AC+. Of the three, the 2400 Pro is the one aimed squarely at balcony-solar households who want more storage and more input capacity than a basic plug-in kit offers, without giving up the DIY-friendly installation that makes plug-in balcony solar attractive in the first place.

What the SolarFlow 2400 Pro actually is

The SolarFlow 2400 Pro is a balcony-solar battery and micro-inverter combined into one unit. TechRadar's roundup of the best plug-in solar gadgets at IFA 2026 confirms the headline spec: it can take on up to 4,800W of solar input across four separate MPPTs, and offers 2,400W of bi-directional AC power — enough to both charge from panels and discharge stored power back into the home circuit. German outlet homeandsmart.de, which tested the unit ahead of the show, breaks that input down further: up to 3,000W arrives via the four DC MPPT inputs, with a further 1,800W available through AC coupling, for the 4,800W combined figure. Zendure's own product listing confirms the four MPPT inputs and the 2,400W AC rating on the standard SolarFlow 2400 Pro page.

Plug-in panels or a retrofit to existing roof panels

What sets the 2400 Pro apart from a typical balcony-solar starter kit is flexibility on the input side. It can run in the usual way — connected to plug-in balcony solar panels, the kind you'd rack against a railing or a south-facing wall — but Zendure also positions it as retrofittable to an existing rooftop solar array, sitting between the panels and the home's wiring to add storage to a system that previously only exported or self-consumed in real time. That dual role is why Zendure markets it as a “retrofit power storage” unit rather than a pure balcony product: the same box can add a battery to panels already on a roof, or start a system from scratch with plug-in panels on a balcony.

Storage capacity and modularity

The base 2400 Pro ships with 2.4kWh of storage, and Zendure's own configurator shows it scaling up to 16.8kWh by adding AB3000L battery modules (2.88kWh each) — a wide enough range to cover anything from a small flat topping up evening usage to a house-sized buffer against peak import prices. That modularity matters for UK buyers because it means the same base unit can start small and grow later, rather than requiring a full system decision up front, similar to the expansion model covered in our guide to home battery storage in the UK.

Where it sits among the new SolarFlow line-up

The 2400 AC+ and 1600 AC+ announced alongside it at IFA are smaller, cheaper siblings rather than replacements — the naming suggests reduced AC output (1,600W or a lower-cost 2,400W tier) aimed at buyers who don't need the Pro's full four-MPPT input or top-end storage ceiling. Zendure hasn't published UK pricing or a UK-market SKU for any of the three at the time of writing; its EU store lists the base 2400 Pro unit (without panels or extra battery packs) from around €959, rising with each AB3000L module and panel bundle added. That's a separate hardware story to Zendure's Agentic HEMS software and the whole-home-focused SolarFlow 4000 Mix Pro, both also shown at this year's IFA — the 2400 Pro stays in balcony/retrofit-battery territory rather than chasing a full hybrid-inverter replacement.

What's still unconfirmed for UK buyers

As with most IFA announcements, the figures above come from Zendure's own materials and pre-show testing coverage rather than a finished UK retail listing. There's no confirmed UK price, no UK-specific export-limit variant (the kind of adjustment Zendure made for its Mix series with the UK-only “3680” model), and no independent long-term review data yet on the 2400 Pro's real-world 4,800W input claim under UK light conditions. Treat this as a strong spec sheet from IFA rather than a proven UK product until Zendure confirms local pricing and stock.

FAQs

What is the Zendure SolarFlow 2400 Pro?

It's a balcony-solar battery and micro-inverter shown at IFA Berlin 2026, capable of taking up to 4,800W of solar input across four MPPTs and delivering 2,400W of bi-directional AC power. It can be paired with plug-in balcony panels or retrofitted to an existing roof solar array.

How much storage does the SolarFlow 2400 Pro have?

The base unit ships with 2.4kWh of storage. Zendure's configurator allows expansion up to 16.8kWh by adding AB3000L battery modules (2.88kWh each), so buyers can start small and scale up later.

Can the SolarFlow 2400 Pro be used with existing roof solar panels?

Yes. Alongside working with plug-in balcony panels, Zendure positions the 2400 Pro as retrofittable to an existing rooftop array, adding battery storage to a system that previously only exported or self-consumed power in real time.

Is the Zendure SolarFlow 2400 Pro available in the UK?

Zendure has not published UK-specific pricing or a UK retail listing for the 2400 Pro at the time of writing; the EU store lists the base unit from around €959 before batteries or panels are added.

Sources — verified 8 September 2026

  1. TechRadar, “Plug-in solar shone at IFA 2026 — here are the 5 best products we saw, from Anker to DJI and EcoFlow”www.techradar.com
  2. homeandsmart.de, “Zendure SolarFlow 2400 Pro im Alltagstest: Lohnt sich der große Balkonspeicher?”www.homeandsmart.de
  3. Zendure, “Zendure SolarFlow 2400 Pro (product page)”zendure.com
Sepehr, solar specialist at Smart Solar Homes

About the author

Sepehr

Solar specialist & co-founder, Smart Solar Homes

Solar specialist and co-founder of Smart Solar Homes, which works with MCS-certified UK installer partners. I write all the guides and reviews here; the aim is straight-talking education the industry rarely provides.

Citing this page? Please use a dofollow link back to the original article — it helps us keep the data on this page accurate and up to date.

Browse Battery Storage on Smart Solar Homes

Want to compare these side by side? Use the compare tool →

Or browse all Battery Storage on Smart Solar Homes.

Related reading

More on battery storage from the editorial team.

Find installers near you

MCS-certified solar installers covering these areas.