Anker SOLIX Power Dock: Semi-DIY EV Charging Hub at IFA 2026

The Anker SOLIX Power Dock is one of the home-energy products Anker is showcasing at IFA Berlin 2026 (4-8 September), as the company folds its Anker, eufy, Soundcore, SOLIX and eufyMake brands back under a single "Anker" name. The Power Dock isn't a brand-new reveal — it was first unveiled as part of Anker's Solarbank Multisystem at IFA 2025 — but it's a headline fixture of Anker's 2026 home-energy line-up, and the detail that matters for UK buyers is what's built into the box: an 11kW three-phase EV charger port and a 7.4kW single-phase port, both included as standard.

What the Power Dock actually is

The Power Dock is the central control unit for Anker's Solarbank Multisystem, part of the wider SOLIX X1 home energy storage range. Rather than a standalone battery, it's a hub: up to four Solarbank battery units plug into it in parallel, scaling to roughly 64.5kWh of total storage, with up to 14.4kW of solar (PV) input and 4.8kW of AC output to the household. Anker's own marketing for the system claims up to 80% off a household's electricity bill and a four-year payback when the Multisystem is fully specified, though those figures depend heavily on solar yield, tariff and household usage, so treat them as best-case rather than a guarantee for any specific home.

The EV charging angle

What sets the Power Dock apart from a typical battery inverter is that EV charging is built in rather than bolted on: it has dedicated 11kW three-phase and 7.4kW single-phase charger ports on the unit itself, so a household can add an EV charger later without extra labour once the Power Dock is installed. Anker also sells a companion SOLIX V1 Smart EV Charger, already listed on Anker's UK store in a 7.4kW single-phase version from around £619, which pairs with the Power Dock for AI-managed, solar-first charging. For context on what those power figures mean for actual charge times, see our guide to EV charger speed and tethering.

The semi-DIY installation pitch

Anker's central claim is installation cost, not just hardware spec. The company describes a "semi-DIY" process: a homeowner can install and connect the solar and battery portions themselves, with a qualified electrician only needed to complete the grid connection and system registration — rather than the multiple days of fully licensed labour a traditional solar-plus-battery-plus-EV-charger install typically needs. Anker's own figure is that this cuts installation costs by up to 85% compared with a conventional professional fit. That's a manufacturer claim rather than an independently audited one, and any DIY element of a home electrical installation in the UK still has to satisfy BS 7671 wiring regulations and, for the grid-connected part, G98/G99 notification to the local network operator — so "semi-DIY" here means less professional labour, not zero regulatory involvement. For the baseline cost of a standard installer-fitted EV charger to compare against, see our home EV charger buyer's guide.

How it fits the wider EV-charging-with-solar picture

Pairing a home battery with EV charging is already a well-established way to shift charging onto cheaper, self-generated or off-peak electricity rather than paying full grid rate — the same logic covered in our guide to EV charging with solar panels. What's new here isn't the concept but Anker packaging the battery hub and the EV charger ports into one product with a lower-labour install path, aimed at the segment of buyers currently priced out of a full professional retrofit.

What's still unconfirmed for the UK

Anker has not published a UK retail price for the Power Dock itself, and full three-phase availability has been described in Anker's own materials as a phased rollout rather than available everywhere at launch. Anker's headline savings and payback figures also come from company marketing rather than independent testing, and no UK installer network or MCS-certification detail specific to the Power Dock has been confirmed publicly at the time of writing. Until pricing, installer availability and independent efficiency figures are confirmed, treat the IFA 2026 showcase as a specification announcement rather than a UK on-sale date.